In meinem Linker-Skript für Binärdateien auf einem MSP430 habe ich einen Speicherabschnitt, der mit "rx" gekennzeichnet ist:
MEMORY {
ROM (rx) : ORIGIN = 0x4400, LENGTH = 0xb000 /* END=0xF3FF, size 45056 */
}
Trotzdem gibt mir readelf:
[ 2] .rodata PROGBITS 0000446c 000140 000500 00 WA 0 0 4
W ist auf .rodata gesetzt, obwohl .rodata dem ROM zugewiesen ist. Dies verwirrt die Größe, die davon ausgeht, dass sich alle beschreibbaren Abschnitte mit Anfangsdaten in .data befinden, was zu einer falschen Schätzung der statischen SRAM-Nutzung führt. Ich könnte dies mit objcopy umgehen, aber gibt es eine sauberere Möglichkeit, dies ausschließlich über das Linker-Skript zu tun?
Beim Ausführen msp430-elf-objcopy --set-section-flags .rodata=CONTENTS,ALLOC,LOAD,READONLY xbdprog.bin xbdprog.bin.newwerden die folgenden Warnungen ausgegeben:
msp430-elf-objcopy: test: section .text lma 0x496e adjusted to 0x5dca
msp430-elf-objcopy: test: section `.text' can't be allocated in segment 4
obwohl dies für meine Anwendung keine Rolle spielt, da size jetzt die richtigen Werte aufnimmt und die elf-Datei sowieso in eine ihex-Datei übersetzt wird. Trotzdem ist es "dreckig". Gibt es einen besseren Weg?
Vollständiges Linker-Skript unten:
/* ============================================================================ */
/* Copyright (c) 2015, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/* This file supports MSP430F5529 devices. */
/* Version: 1.159 */
/* Default linker script, for normal executables */
/* Modified for building executables loaded through XBX bootloader */
OUTPUT_ARCH(msp430)
ENTRY(_start)
MEMORY {
SFR : ORIGIN = 0x0000, LENGTH = 0x0010 /* END=0x0010, size 16 */
PERIPHERAL_8BIT : ORIGIN = 0x0010, LENGTH = 0x00F0 /* END=0x0100, size 240 */
PERIPHERAL_16BIT : ORIGIN = 0x0100, LENGTH = 0x0100 /* END=0x0200, size 256 */
RAM : ORIGIN = 0x2400, LENGTH = 0x2000 /* END=0x43FF, size 8192 */
INFOMEM : ORIGIN = 0x1800, LENGTH = 0x0200 /* END=0x19FF, size 512 as 4 128-byte segments */
INFOA : ORIGIN = 0x1980, LENGTH = 0x0080 /* END=0x19FF, size 128 */
INFOB : ORIGIN = 0x1900, LENGTH = 0x0080 /* END=0x197F, size 128 */
INFOC : ORIGIN = 0x1880, LENGTH = 0x0080 /* END=0x18FF, size 128 */
INFOD : ORIGIN = 0x1800, LENGTH = 0x0080 /* END=0x187F, size 128 */
ROM (rx) : ORIGIN = 0x4400, LENGTH = 0xb000 /* END=0xF3FF, size 45056 */
BSL : ORIGIN = 0x1000, LENGTH = 0x0800
USBRAM : ORIGIN = 0x1C00, LENGTH = 0x0800
HIROM (rx) : ORIGIN = 0x00010000, LENGTH = 0x000143FF
}
SECTIONS
{
/* This is just for crt0.S and interrupt handlers. */
.lowtext :
{
PROVIDE (_start = .);
. = ALIGN(2);
KEEP (*(SORT(.crt_*)))
KEEP (*(.lowtext))
} > ROM
.rodata :
{
. = ALIGN(2);
*(.plt)
. = ALIGN(2);
*(.lower.rodata.* .lower.rodata)
. = ALIGN(2);
*(.rodata .rodata.* .gnu.linkonce.r.* .const .const:*)
*(.rodata1)
*(.eh_frame_hdr)
KEEP (*(.eh_frame))
KEEP (*(.gcc_except_table)) *(.gcc_except_table.*)
PROVIDE (__preinit_array_start = .);
KEEP (*(.preinit_array))
PROVIDE (__preinit_array_end = .);
PROVIDE (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
PROVIDE (__init_array_end = .);
PROVIDE (__fini_array_start = .);
KEEP (*(.fini_array))
KEEP (*(SORT(.fini_array.*)))
PROVIDE (__fini_array_end = .);
LONG(0); /* Sentinel. */
/* gcc uses crtbegin.o to find the start of the constructors, so
we make sure it is first. Because this is a wildcard, it
doesn't matter if the user does not actually link against
crtbegin.o; the linker won't look for a file to match a
wildcard. The wildcard also means that it doesn't matter which
directory crtbegin.o is in. */
KEEP (*crtbegin*.o(.ctors))
/* We don't want to include the .ctor section from from the
crtend.o file until after the sorted ctors. The .ctor section
from the crtend file contains the end of ctors marker and it
must be last */
KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
KEEP (*crtbegin*.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
} > ROM
.upper.rodata :
{
*(.upper.rodata.* .upper.rodata)
} > HIROM
.data :
{
. = ALIGN(2);
PROVIDE (__datastart = .);
*(.lower.data.* .lower.data)
. = ALIGN(2);
*(.either.data.* .either.data)
. = ALIGN(2);
KEEP (*(.jcr))
*(.data.rel.ro.local) *(.data.rel.ro*)
*(.dynamic)
. = ALIGN(2);
*(.data .data.* .gnu.linkonce.d.*)
KEEP (*(.gnu.linkonce.d.*personality*))
SORT(CONSTRUCTORS)
*(.data1)
*(.got.plt) *(.got)
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
. = ALIGN(2);
*(.sdata .sdata.* .gnu.linkonce.s.* D_2 D_1)
. = ALIGN(2);
_edata = .;
PROVIDE (edata = .);
PROVIDE (__dataend = .);
} > RAM AT> ROM
/* Note that crt0 assumes this is a multiple of two; all the
start/stop symbols are also assumed word-aligned. */
PROVIDE(__romdatastart = LOADADDR(.data));
PROVIDE (__romdatacopysize = SIZEOF(.data));
.bss :
{
. = ALIGN(2);
PROVIDE (__bssstart = .);
*(.lower.bss.* .lower.bss)
. = ALIGN(2);
*(.either.bss.* .either.bss)
*(.dynbss)
*(.sbss .sbss.*)
*(.bss .bss.* .gnu.linkonce.b.*)
. = ALIGN(2);
*(COMMON)
PROVIDE (__bssend = .);
} > RAM
PROVIDE (__bsssize = SIZEOF(.bss));
/* This section contains data that is not initialised at startup. */
.noinit :
{
. = ALIGN(2);
PROVIDE (__noinit_start = .);
*(.noinit)
. = ALIGN(2);
PROVIDE (__noinit_end = .);
} > RAM
_end = .;
PROVIDE (end = .);
.stack (ORIGIN (RAM) + LENGTH(RAM)) :
{
PROVIDE (__stack = .);
*(.stack)
}
.text :
{
. = ALIGN(2);
*(.lower.text.* .lower.text)
. = ALIGN(2);
*(.text .stub .text.* .gnu.linkonce.t.* .text:*)
KEEP (*(.text.*personality*))
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
*(.interp .hash .dynsym .dynstr .gnu.version*)
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
. = ALIGN(2);
KEEP (*(.init))
KEEP (*(.fini))
KEEP (*(.tm_clone_table))
} > ROM
.upper.text :
{
. = ALIGN(2);
*(.upper.text.* .upper.text)
} > HIROM
.infoA : {} > INFOA /* MSP430 INFO FLASH MEMORY SEGMENTS */
.infoB : {} > INFOB
.infoC : {} > INFOC
.infoD : {} > INFOD
/* Make sure that upper data sections are not used. */
.upper :
{
*(.upper.bss.* .upper.bss)
*(.upper.data.* .upper.data)
ASSERT (SIZEOF(.upper) == 0, "This MCU does not support placing read/write data into high memory");
}
/* The rest are all not normally part of the runtime image. */
.MP430.attributes 0 :
{
KEEP (*(.MSP430.attributes))
KEEP (*(.gnu.attributes))
KEEP (*(__TI_build_attributes))
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1. */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions. */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2. */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2. */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions. */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* DWARF 3 */
.debug_pubtypes 0 : { *(.debug_pubtypes) }
.debug_ranges 0 : { *(.debug_ranges) }
/* DWARF Extension. */
.debug_macro 0 : { *(.debug_macro) }
/DISCARD/ : { *(.note.GNU-stack) }
}
Vollständige Readelf-Ausgabe:
ELF Header:
Magic: 7f 45 4c 46 01 01 01 ff 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, little endian
Version: 1 (current)
OS/ABI: Standalone App
ABI Version: 0
Type: EXEC (Executable file)
Machine: Texas Instruments msp430 microcontroller
Version: 0x1
Entry point address: 0x4400
Start of program headers: 52 (bytes into file)
Start of section headers: 126884 (bytes into file)
Flags: 0x2d
Size of this header: 52 (bytes)
Size of program headers: 32 (bytes)
Number of program headers: 5
Size of section headers: 40 (bytes)
Number of section headers: 21
Section header string table index: 18
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[ 0] NULL 00000000 000000 000000 00 0 0 0
[ 1] .lowtext PROGBITS 00004400 0000d4 00006c 00 AX 0 0 1
[ 2] .rodata PROGBITS 0000446c 000140 000500 00 WA 0 0 4
[ 3] .data PROGBITS 00002400 000640 000002 00 WA 0 0 2
[ 4] .bss NOBITS 00002404 000644 00145c 00 WA 0 0 4
[ 5] .noinit PROGBITS 00003860 0091ce 000000 00 W 0 0 1
[ 6] .text PROGBITS 0000496e 000642 008b8c 00 AX 0 0 2
[ 7] .upper.text PROGBITS 00010000 0091ce 000000 00 W 0 0 1
[ 8] .MP430.attributes LOPROC+3 00000000 0091ce 0004f1 00 0 0 1
[ 9] .comment PROGBITS 00000000 0096bf 0000a5 01 MS 0 0 1
[10] .debug_aranges PROGBITS 00000000 009768 000470 00 0 0 8
[11] .debug_info PROGBITS 00000000 009bd8 007212 00 0 0 1
[12] .debug_abbrev PROGBITS 00000000 010dea 001d63 00 0 0 1
[13] .debug_line PROGBITS 00000000 012b4d 001e04 00 W 0 0 1
[14] .debug_frame PROGBITS 00000000 014954 000664 00 0 0 4
[15] .debug_str PROGBITS 00000000 014fb8 001023 01 MS 0 0 1
[16] .debug_loc PROGBITS 00000000 015fdb 0020f1 00 0 0 1
[17] .debug_ranges PROGBITS 00000000 0180d0 000300 00 0 0 8
[18] .shstrtab STRTAB 00000000 0183d0 0000cc 00 0 0 1
[19] .symtab SYMTAB 00000000 01849c 004eb0 10 20 1016 4
[20] .strtab STRTAB 00000000 01d34c 001c56 00 0 0 1
Key to Flags:
W (write), A (alloc), X (execute), M (merge), S (strings)
I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown)
O (extra OS processing required) o (OS specific), p (processor specific)
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x0000432c 0x0000432c 0x00140 0x00140 R E 0x4
LOAD 0x000140 0x0000446c 0x0000446c 0x00500 0x00500 RW 0x4
LOAD 0x000640 0x00002400 0x0000496c 0x00002 0x00002 RW 0x4
LOAD 0x000644 0x00002404 0x0000496e 0x00000 0x0145c RW 0x4
LOAD 0x000642 0x0000496e 0x0000496e 0x08b8c 0x08b8c R E 0x4
Section to Segment mapping:
Segment Sections...
00 .lowtext
01 .rodata
02 .data
03 .bss
04 .text
Für den Moment habe ich das Linker-Skript so geändert, dass nur die Inhalte von .rodata und .upper.rodata in ihre jeweiligen .text-Segmente eingefügt werden, was funktioniert, aber das erscheint unelegant, wenn .rodata nur gelesen werden soll, da es dem ROM zugewiesen ist an erster Stelle.
/* ============================================================================ */
/* Copyright (c) 2015, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/* This file supports MSP430F5529 devices. */
/* Version: 1.159 */
/* Default linker script, for normal executables */
/* Modified for building executables loaded through XBX bootloader */
OUTPUT_ARCH(msp430)
ENTRY(_start)
MEMORY {
SFR : ORIGIN = 0x0000, LENGTH = 0x0010 /* END=0x0010, size 16 */
PERIPHERAL_8BIT : ORIGIN = 0x0010, LENGTH = 0x00F0 /* END=0x0100, size 240 */
PERIPHERAL_16BIT : ORIGIN = 0x0100, LENGTH = 0x0100 /* END=0x0200, size 256 */
RAM : ORIGIN = 0x2400, LENGTH = 0x2000 /* END=0x43FF, size 8192 */
INFOMEM : ORIGIN = 0x1800, LENGTH = 0x0200 /* END=0x19FF, size 512 as 4 128-byte segments */
INFOA : ORIGIN = 0x1980, LENGTH = 0x0080 /* END=0x19FF, size 128 */
INFOB : ORIGIN = 0x1900, LENGTH = 0x0080 /* END=0x197F, size 128 */
INFOC : ORIGIN = 0x1880, LENGTH = 0x0080 /* END=0x18FF, size 128 */
INFOD : ORIGIN = 0x1800, LENGTH = 0x0080 /* END=0x187F, size 128 */
ROM (rx) : ORIGIN = 0x4400, LENGTH = 0xb000 /* END=0xF3FF, size 45056 */
BSL : ORIGIN = 0x1000, LENGTH = 0x0800
USBRAM : ORIGIN = 0x1C00, LENGTH = 0x0800
HIROM (rx) : ORIGIN = 0x00010000, LENGTH = 0x000143FF
}
SECTIONS
{
/* This is just for crt0.S and interrupt handlers. */
.lowtext :
{
PROVIDE (_start = .);
. = ALIGN(2);
KEEP (*(SORT(.crt_*)))
KEEP (*(.lowtext))
} > ROM
.data :
{
. = ALIGN(2);
PROVIDE (__datastart = .);
*(.lower.data.* .lower.data)
. = ALIGN(2);
*(.either.data.* .either.data)
. = ALIGN(2);
KEEP (*(.jcr))
*(.data.rel.ro.local) *(.data.rel.ro*)
*(.dynamic)
. = ALIGN(2);
*(.data .data.* .gnu.linkonce.d.*)
KEEP (*(.gnu.linkonce.d.*personality*))
SORT(CONSTRUCTORS)
*(.data1)
*(.got.plt) *(.got)
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
. = ALIGN(2);
*(.sdata .sdata.* .gnu.linkonce.s.* D_2 D_1)
. = ALIGN(2);
_edata = .;
PROVIDE (edata = .);
PROVIDE (__dataend = .);
} > RAM AT> ROM
/* Note that crt0 assumes this is a multiple of two; all the
start/stop symbols are also assumed word-aligned. */
PROVIDE(__romdatastart = LOADADDR(.data));
PROVIDE (__romdatacopysize = SIZEOF(.data));
.bss :
{
. = ALIGN(2);
PROVIDE (__bssstart = .);
*(.lower.bss.* .lower.bss)
. = ALIGN(2);
*(.either.bss.* .either.bss)
*(.dynbss)
*(.sbss .sbss.*)
*(.bss .bss.* .gnu.linkonce.b.*)
. = ALIGN(2);
*(COMMON)
PROVIDE (__bssend = .);
} > RAM
PROVIDE (__bsssize = SIZEOF(.bss));
/* This section contains data that is not initialised at startup. */
.noinit :
{
. = ALIGN(2);
PROVIDE (__noinit_start = .);
*(.noinit)
. = ALIGN(2);
PROVIDE (__noinit_end = .);
} > RAM
_end = .;
PROVIDE (end = .);
.stack (ORIGIN (RAM) + LENGTH(RAM)) :
{
PROVIDE (__stack = .);
*(.stack)
}
.text :
{
. = ALIGN(2);
*(.lower.text.* .lower.text)
. = ALIGN(2);
*(.text .stub .text.* .gnu.linkonce.t.* .text:*)
KEEP (*(.text.*personality*))
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
*(.interp .hash .dynsym .dynstr .gnu.version*)
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
. = ALIGN(2);
KEEP (*(.init))
KEEP (*(.fini))
KEEP (*(.tm_clone_table))
. = ALIGN(2);
*(.plt)
. = ALIGN(2);
*(.lower.rodata.* .lower.rodata)
. = ALIGN(2);
*(.rodata .rodata.* .gnu.linkonce.r.* .const .const:*)
*(.rodata1)
*(.eh_frame_hdr)
KEEP (*(.eh_frame))
KEEP (*(.gcc_except_table)) *(.gcc_except_table.*)
PROVIDE (__preinit_array_start = .);
KEEP (*(.preinit_array))
PROVIDE (__preinit_array_end = .);
PROVIDE (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
PROVIDE (__init_array_end = .);
PROVIDE (__fini_array_start = .);
KEEP (*(.fini_array))
KEEP (*(SORT(.fini_array.*)))
PROVIDE (__fini_array_end = .);
LONG(0); /* Sentinel. */
/* gcc uses crtbegin.o to find the start of the constructors, so
we make sure it is first. Because this is a wildcard, it
doesn't matter if the user does not actually link against
crtbegin.o; the linker won't look for a file to match a
wildcard. The wildcard also means that it doesn't matter which
directory crtbegin.o is in. */
KEEP (*crtbegin*.o(.ctors))
/* We don't want to include the .ctor section from from the
crtend.o file until after the sorted ctors. The .ctor section
from the crtend file contains the end of ctors marker and it
must be last */
KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
KEEP (*crtbegin*.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
} > ROM
.upper.text :
{
. = ALIGN(2);
*(.upper.text.* .upper.text)
*(.upper.rodata.* .upper.rodata)
} > HIROM
.infoA : {} > INFOA /* MSP430 INFO FLASH MEMORY SEGMENTS */
.infoB : {} > INFOB
.infoC : {} > INFOC
.infoD : {} > INFOD
/* Make sure that upper data sections are not used. */
.upper :
{
*(.upper.bss.* .upper.bss)
*(.upper.data.* .upper.data)
ASSERT (SIZEOF(.upper) == 0, "This MCU does not support placing read/write data into high memory");
}
/* The rest are all not normally part of the runtime image. */
.MP430.attributes 0 :
{
KEEP (*(.MSP430.attributes))
KEEP (*(.gnu.attributes))
KEEP (*(__TI_build_attributes))
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1. */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions. */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2. */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2. */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions. */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* DWARF 3 */
.debug_pubtypes 0 : { *(.debug_pubtypes) }
.debug_ranges 0 : { *(.debug_ranges) }
/* DWARF Extension. */
.debug_macro 0 : { *(.debug_macro) }
/DISCARD/ : { *(.note.GNU-stack) }
}
Laut der ld-Dokumentation : "Die attr-Zeichenfolge ist eine optionale Liste von Attributen, die angeben, ob ein bestimmter Speicherbereich für einen Eingabeabschnitt verwendet werden soll, der nicht explizit im Linker-Skript abgebildet ist." - also rxin ROM (rx) ...wird ignoriert.
Ein Post in einer Mailingliste weist darauf hin, dass dies darauf zurückzuführen ist, dass ein Lese-Schreib-Flag in einem Eingabeabschnitt gesetzt wurde. Um dies zu beheben, musste ich das gesamte C++-Zeug in .rodata nach .rodata1 in einen eigenen Abschnitt verschieben.